Ignition Switch; Headlight Switch - Polaris RZR 800 Owner's Manual

Switches

Ignition Switch

The ignition switch is a three-position, key-operated switch. Use the
ignition switch to start the engine. See page 50 for starting procedures.
The key can be removed from the switch when it is in the OFF position.
OFF The engine is off. Electrical circuits are off.
ON Electrical circuits are on. Electrical equipment can be used.
START Turn the key to the START position to engage the electric starter.
The key returns to the ON position when released.

Headlight Switch

Use the headlight switch to turn the lights on and
off and to change the lights from high beam to low
beam. The ignition switch must be in the ON posi-
tion to operate the headlights.
Press the top of the rocker switch toward the dash
to place the headlights on high beam. Move the
rocker switch to the center position to place the
headlights on low beam. Press the bottom of the
rocker switch to turn off the headlights.
All Wheel Drive (AWD) Switch
The AWD Switch has two positions:
• All Wheel Drive (AWD)
• Two Wheel Drive (2WD).
Press the top of the rocker switch to engage All
Wheel Drive. Press the bottom of the switch to
operate in two wheel drive.
See page 36 for AWD operating instructions.
FEATURES AND CONTROLS
HIGH
LOW
AWD
2WD
33