Table of Contents
Advertisement
Thunder i7525 (S2676)
Discard Changes & Exit -
Get Default Values
Load Previous Values
Chapter 5: Diagnostics
Note: if you experience problems with setting up your system, always check the following things in
the following order:
By checking these items, you will most likely find out what the problem might have been when
setting up your system. For more information on troubleshooting, check the TYAN website at:
http://www.tyan.com.
5.1 Beep Codes
Fatal errors, which halt the boot process, are communicated through a series of audible beeps.
For example, if the BIOS POST can initialize the video but an error occurs, an error message will
be displayed. If it cannot display the message, it will report the error as a series of beeps.
The most common type of error is a memory error.
Before contacting your vendor or TYAN Technical Support, be sure that you note as much as you
can about the beep code length and order that you experience. Also, be ready with information
regarding add-in cards, drives and O/S to speed the support process and come to a quicker
solution.
5.2 Flash Utility
Every BIOS file is unique for the motherboard it was designed for.
downloads, and information on how to properly use the Flash Utility with your motherboard,
please check the TYAN web site:
-
-
Memory, Video, CPU
http://www.tyan.com/
4-22
http://www.tyan.com
CMOS.
Exit
utility
without
saving Setup data to
CMOS.
Load default values for
all Setup items.
Load Previous values
from
CMOS
for
Setup items.
For Flash Utilities, BIOS
all
Advertisement
Table of Contents
