Faq - Better Rest SoClean 2 CPAP User Manual

FAQ

1. Will my CPAP equipment be wet from
the SoClean? No. The SoClean sanitizes
with activated oxygen. No fluids or water
are used in this process.
2. Is the SoClean harmful to me or the
environment? No. The activated oxygen
generator is always kept at a safe level and
never reaches the outside environment.
3. How do I know that my SoClean
is truly sanitizing? After the sanitizing
process has been successfully completed,
the cycle indicator light will shine green.
Your CPAP equipment will have a light,
clean scent.
4. What if the scent the SoClean
leaves is too strong for me? If you have
already treated your equipment with the
Neutralizing Pre-Wash, and still feel that
the scent is too strong, there are a number
of things you can do: (1) Before wearing
your mask at bedtime, run your CPAP for
18
20 seconds to allow any residual scent
to be blown out. (2) Set the timer so that
treatments take place earlier in the day,
allowing any residual scent to dissipate
by nighttime. (3) Reduce the treatment
duration time. You can cut back to as little
as 5 minutes and still receive effective
sanitizing. (4) Sanitize your equipment every
other day instead of daily.
5. What if my indicator light is shining
red or yellow? This means that the
sanitizing process is not yet complete.
Please wait until the light shines green to
remove your CPAP equipment from the
SoClean chamber. (see page 14)
6. What if my indicator light is not
shining after a scheduled cleaning
time? This would indicate that the SoClean
did not carry out its scheduled sanitizing.
Common reasons for this are that the lid
was not securely closed, there was no
mask in the chamber at cleaning time or
the open hose slot plug is missing or not
properly seated.