Installing A Front Panel Usb Solution; Front Panel Usb 2.0 Header (J9F1) - Intel D845PESV Product Manual

Intel Desktop Board D845PESV Product Guide
To restore back panel operations, follow these steps:
1. Observe the precautions in "Before You Begin" on page 21.
2. Turn off all peripheral devices connected to the computer. Turn off the computer and
disconnect the AC power cord.
3. Remove the cover.
4. Remove the front panel audio cable.
5. Install a jumper on pins 5-6 (rear R channel).
6. Install a jumper on pins 9-10 (rear L channel).
7. Replace the cover.

Installing a Front Panel USB Solution

Figure 10, B on page 30 shows the location of the front panel USB 2.0 header.
Table 6 shows the pin assignments for the front panel USB 2.0 header.
Table 6.

Front Panel USB 2.0 Header (J9F1)

Pin Signal name
1 VREG_FP_WSBPWR0
3 USB_FPP0-
5 USB_FPP0+
7 Ground
9 Key
Note: USB ports may be assigned as needed.
Before installing a front panel USB 2.0 solution, observe the precautions in "Before You Begin"
on page 21.
32
Pin Signal name
2 VREG_FP_USBPWR0
4 USB_FPP1-
6 USB_FPP1+
8 Ground
10 USB_FP_OC0