Sherwood RD-6506 Operating Instructions Manual page 23

RD-6506(G)_ENG_110330_RD-6506(G)_ENG 2011-04-14 오전 9:29 페이지 23
Manual presetting
• You can store up to 30 preferred stations in the memory.
1.
Tune in the desired station with auto or manual tuning.
2.
Press the ENTER(/MEMORY) button.
• "MEM", etc. flicker.
3.
Select the desired preset number (1~30) and press the
ENTER(/MEMORY) button.
TUNE
PRESET
• When using the NUMERIC buttons on the remote control.
Examples : For "3" :
For "15" :
For "30" :
• The station has now been stored in the memory.
• When specifying a two digit number with using the NUMERIC
buttons, the station is stored automatically without pressing the
ENTER(/MEMORY) button.
• A stored frequency is erased from the memory by storing
another frequency in its place.
4.
Repeat the above steps1 to 3 to memorize other
stations.
■MEMORY BACKUP FUNCTION
The following items, set before the receiver is turned off,
are memorized.
• INPUT SELECTOR settings
• Surround mode settings
• Preset stations,etc.
ENTER/MEMO
ENTER/MEMO
Tuning to preset stations
• After selecting the tuner as an input source, select the
desired preset number.
PRESET
• When using the NUMERIC buttons on the remote control.
Examples: For "3" :
For "15" :
For "30" :
23