Special Playback; Rental Playback; Auto Repeat Playback - Emerson EWC19T1 Owner's Manual

TD351_01-35 02.2.18 1:41 PM Page 27
Make sure ...
•
TV/DVD/VHS power must be turned on.
•
Insert a prerecorded tape.
•
Before playback, follow steps below.

RENTAL PLAYBACK

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow K or L button to
point to "USER'S SET UP".
Then, press the Arrow B button.
2
Set "RENTAL" to [ON]
Press the Arrow K or L button to
point to "RENTAL".
Press the Arrow B or s button
until [ON] appears.
3
Exit the Rental setting
Press the SETUP button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY B" appears.
•
Once you select the Rental mode, it stays in effect
even after you turn off the TV/DVD/VHS.
TO CANCEL THE RENTAL MODE
Repeat steps [1] and [2], select [OFF] using the
Arrow B or s button on the remote control. Press
the SETUP button on the remote control to return to
TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.

SPECIAL PLAYBACK

AUTO REPEAT PLAYBACK

The TV/DVD/VHS has the auto repeat function that
allows you to repeat a tape indefinitely without
touching the PLAY button.
ALL REPEAT:
to the end of the tape.
BLANK REPEAT
ning to a blank part, which is blank for more than
10 seconds.
1
Select "USER'S SET UP"
- TV/VCR SETUP - Press the SETUP button on the
TIMER PROGRAMMING
SETTING CLOCK
remote control.
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
Press the Arrow K or L button to
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN point to "USER'S SET UP".
TIME SEARCH
INDEX SEARCH
Then, press the Arrow B button.
2
Select "ALL" or "BLANK"
– USER'S SET UP –
Press the Arrow K or L button to
B RENTAL [ON]
point to "REPEAT PLAY".
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
Press the Arrow B or s button
TV AUDIO [STEREO]
repeatedly until your desired selec-
tion [ALL] or [BLANK] appears.
3
Exit the Repeat Play setting
Press the SETUP button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/DVD/VHS.
•
If the Rental mode is set [ON], the "RENTAL
PLAY B" display has priority.
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] and [2], select [OFF] using the
Arrow B or s button on the remote control. Press
the SETUP button on the remote control to return to
TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 27 -
Repeat playback from the beginning
: Repeat playback from the begin-
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER'S SET UP –
RENTAL
B REPEAT PLAY
AUTO RETURN
VCR AUDIO
TV AUDIO
[OFF]
[ALL]
[OFF]
[HIFI]
[STEREO]
EN
1C29