Table of Contents
Advertisement
TD251EN 01.5.31 7:15 PM Page 22
USING THE TITLE MENU
With a DVD containing a title menu, you can select
desired titles from the menu.
1
Press the TITLE button.
¡
The title menu will appear.
2
Select the desired title.
¡
Press the arrow buttons (
setting, and then press the ENTER button.
CALLING UP A MENU SCREEN
DURING PLAYBACK
For DVDs
¡
Press the DISC MENU button to call up the DVD
menu.
¡
Press the TITLE button to call up the title menu.
Note
¡
Contents of menus and corresponding menu
operations may vary between discs. Refer to the
manual accompanying the disc for details.
PAUSING PLAYBACK OR
DISPLAYING A STILL PICTURE
1
Press the PAUSE button during playback.
¡
Playback will pause, with sound
muted.
2
Press the PLAY button to resume playback.
DVD
L
K
/
/B/s) to change the
DVD
CD
Pause F
Play B
– 22 –
– 22 –
– 22 –
RESUMING PLAYBACK FROM
THE POINT WHERE
PLAYBACK STOPPED
1
Press the STOP button during playback.
¡
Playback will stop, and then
appear the resuming message at
the center.
2
Press the PLAY button. Playback will start
from the point where the previous playback
session was stopped.
Notes
¡
Resuming playback is not available with some discs.
¡
If you switch to the TV mode during DVD playback,
the resuming
¡
It is possible to switch from the DVD play mode to
the TV mode. Even if the power is turned off, the
resume function enables to playback on from the
previously interrupted point. But note that the
Marker commands are not saved.
¡
The resume function can be reset by pressing the
STOP button twice or by opening the disc loading
tray.
STEPPING THROUGH FRAMES
1
Press the PAUSE button while playback is
paused.
¡
The next picture frame is dis-
played with sound muted each
time the button is pressed.
2
Press the PLAY button to resume playback.
DVD
CD
Press 'PLAY' to play from here
To play beginning, press 'STOP' first
and the 'PLAY'.
Play B
DVD
Pause F
Play B
EN
0C28
Advertisement
Table of Contents
