Set-Up Menu - Sony Bravia KLV-52W400A Operating Instructions Manual

Set-up menu

You can select the options listed below on the "Set-
up" menu. To select options in "Settings", refer to
"Navigating through menus" (page 22).
Auto Start-up
Language
Cinema Drive
Video/Photo
Starts the initial set-up to select the language, country/region and location, and tune
in all available channels.
Usually, you do not need to do this operation because the language will have been
selected and channels already tuned when the TV was first installed (page 6).
However, this option allows you to repeat the process (e.g. to retune the TV after
moving house, or to search for new channels that have been launched by
broadcasters).
Selects the language in which the menus are displayed.
Provides improved picture movement when playing DVD or VCR images taken on
film, reducing picture blur and graininess.
"Auto 1": Provides smoother picture movement than the original film-based
content. Use this setting for standard use.
"Auto 2": Provides the original film-based content as is.
"Off": Turns off the "Cinema Drive" feature.
~
If the image contains irregular signals or too much noise, "Cinema Drive" will be automatically
turned off even if "Auto 1" or "Auto 2" is selected.
Provides suitable image quality by selecting the option depending on the input
source (video or photograph data).
"Video-A": Sets suitable image quality, depending on the input source, video data
or photograph data when directly connecting Sony HDMI output-capable equipment
that supports "Video-A" mode.
"Video": Produces suitable image quality for moving pictures.
"Photo": Produces suitable image quality for still images.
~
The setting is fixed to "Video" when Video-A mode is not supported on the connected
equipment, even if "Video-A" is selected.
Continued
29
GB