Programming A Device - DirecTV Big Easy Remote Control User Manual

Press this key...

PROGRAMMING A DEVICE

The DIRECTV Big Button Remote comes pre-
programmed to operate a DTV Receiver or DVR. To
control devices other than default brands, follow these
steps; otherwise, skip this section.
Before proceeding, find the codes for the devices you
want to program in Manufacturer's Codes and write
them down or highlight them. (See "Manufacturer's
Codes" on page 13.)
NOTE: To program a TV/DVD, TV/VCR/DVD, or TV/
VCR Combo, use the AUX 1 or AUX 2 key.
1. Turn on the device (for example, TV) and, if
needed, load media (for example, DVD).
Use the arrows to move the cursor in
the program Guide and menu
screens. Press SELECT to choose
options from the selected device's
menu or Guide.
Display the Quick Menu in
DIRECTV mode, or other menu for
another selected device.
View the current channel and
program information.
Raise or lower the sound level.
Turn the sound off or on.
Select the next or previous channel.
Select next or previous chapter on
some models of DVD players.
When in the DIRECTV Guide or
other menu, CH+ (or CH- ) allows
you to page up (or down) through a
list of items.
Recall the last-viewed channel.
Directly enter channels (for
example, 09 or 31).
5
To...