INSTALLING BATTERIES ® Your DIRECTV alkaline batteries (included). To Install Batteries: Open the battery compartment cover (located on the back of the remote). Place the AA batteries in the compartment and match the + and - polarity symbols inside. Replace the cover. Battery Use And Safety •...
• If you do not plan to use the remote for an extended period, remove the batteries. They can leak chemicals that can destroy electronic parts. WARNING: Dispose of old batteries promptly and prop- erly. Do not burn or bury them. FEATURES AND FUNCTIONS NOTE: The DIRECTV Big Button Remote does not...
Press this key… PROGRAMMING A DEVICE The DIRECTV Big Button Remote comes pre- programmed to operate a DTV Receiver or DVR. To control devices other than default brands, follow these steps; otherwise, skip this section. Before proceeding, find the codes for the devices you want to program in Manufacturer's Codes and write them down or highlight them.
On the remote, press and release the appropriate mode key for the device you want to program (that is, DIRECTV, TV, AUX 1, or AUX 2). Press and hold the mode key until the green LED flashes twice. Release the key. Enter the first five-digit code for your device.
To search for other device codes, repeat steps 1 to 6, substituting the appropriate key for the device. CHECKING THE CODES If you have set up the remote using the procedure in Searching for Your Code, you may need to find out which four-digit code is operating your equipment.
Repeat steps 1 to 2 for any other device that you want to have independent volume control. Locking Volume Control to One Mode (Global Volume Lock) Select and hold the mode key for a device (for example, TV) until the green LED blinks twice. Enter 9 9 3 and then press the key for a second device (for example, AUX 1 to control the volume of an audio amplifier).
settings for Volume Lock and Channel Lock. Press and hold a device key (for example, DIRECTV). Enter 9 8 1. The last-selected device key blinks twice, pauses, and blinks twice again to confirm that all custom programming is cleared. TROUBLESHOOTING PROBLEM: Light at the top of the remote blinks when you press a key, but the component does not respond.
• Handle the remote gently and carefully. Don’t drop it. • Wipe the remote with a damp cloth to keep it looking like new. Modifying or tampering with the internal parts can cause damage and invalidate the warranty. SPECIFICATIONS Power(2) AA Alkaline Batteries Size (H x W x D)7.67 x 2.44 x 1.42 in.
Vector Research Video Concepts Videomagic Videosonic Viewsonic Villain Voodoo Wards White Westinghouse XR-1000 Yamaha Zenith ZT Group Setup Codes for DVD Players Aiwa Akai Alco Allegro Amphion Media Works Apex Digital Aspire Digital Audiovox Axion B & K Blaupunkt Blue Parade Broksonic California Audio Labs Cinea...