Using Adapters; Configuring The Display (Optional) - AMD Radeon HD 7900 User Manual

Table 4–2 Sample Display Configurations
Sample Display
Configuration
6×mDP
DVI, 2×mDP, 2×mDP Native
2×mDP, VGA, HDMI -
DVI, 2×mDP, HDMI
DVI, HDMI, mDP,
HDMI
DVI, mDP, mDP
DVI, DVI, VGA
For additional configuration information, visit http://www.amd.com/eyefinity.
Once displays are connected to the graphics card, you can change how your displays
are configured using the Control Center software application. For more information,
see Chapter 6 Using the Control Center Software (p.

4.3 Using Adapters

The following procedure describes how to connect a display to your graphics card
using an adapter.
1. Turn off your computer and display.
2. Plug the adapter into the connection from your AMD Radeon graphics card and
tighten the thumbscrews (if there are any).
3. Connect your display's cable to the adapter and tighten the thumbscrews (if
there are any).
4. Turn on your display first, then your computer.
Use the Control Center software application to configure the new display.

4.4 Configuring the Display (Optional)

To change the display configuration or if you are experiencing an issue with the
display, do the following:
Note: If you are not experiencing any troubles with the display, no adjustments are
necessary.
1. Right-click on the desktop and, in the shortcut that appears, click Properties.
The Display Properties dialog appears.
2. Click the Settings tab and then select the screen resolution and color depth that
best suit your requirements and the display's performance.
3. Click Advanced and then select the Monitor tab.
© 2013 Advanced Micro Devices, Inc.
DVI-I mDP
Connector Connector
- Native (×6)
Native (×2)
Native (×2)
- mDP to DVI (A)
Native mDP to DVI (A)
Native Native
Native mDP to DVI (A)
mDP HDMI
Connector Connector
- -
Native (×2) -
mDP to VGA (A) Native
Native (×2) Native
Native Native
Native -
mDP to VGA (A) -
21).
Display Configuration 13
Total
Output
6
5
4
4
4
3
3
AMD Radeon™ HD 7900 Series