Insignia NS-CL19C 19" Combo DVD/LCD TV
Connecting to a VCR or other AV source
To connect your TV to a VCR or other AV
source:
1 Turn off the TV and the VCR (or other
source).
2 Connect an RCA video cable to the VCR (1),
then to the VIDEO IN jack on the back of the
TV (2).
- OR -
Connect an S-Video cable to the VCR, then
to the S-VIDEO jack on the back of the TV.
3 Connect RCA audio cables to the VCR's
audio output jacks, then to the AUDIO L and
R jacks on the back of the TV.
4 Turn on the TV and the VCR.
5 Set the VCR output switch to channel 3 or 4,
then tune your TV to the same channel.
6 Press the INPUT button to set the TV's signal
input to AV or S-VIDEO.
Connecting to a cable box
To connect your TV to a cable box with an RF
cable (1):
1 Turn off the TV and the cable box.
2 Connect a 75 ohm RF cable from the cable
3 Set the cable box output switch to channel 3
4 Turn on the TV and the cable box.
5 Change channels at the cable box or with the
To connect your TV to a cable box with a AV
cables (2):
1 Turn off the TV and the cable box.
2 Connect RCA video and audio cables from
3 Turn on the TV and the cable box.
4 Press the INPUT button to set the TV's signal
5 Change channels at the cable box or with the
www.insignia-products.com
box to the ANT IN jack on the back of your
TV.
or 4, then tune your TV to the same channel.
cable box remote.
the cable box to the VIDEO and AUDIO IN
jacks on the back of your TV.
•
Yellow - Video
•
White - Audio left
•
Red - Audio right
input to AV or S-VIDEO.
cable box remote.
9