Playing A Jpeg Disc; Customizing Tv Settings; Opening And Navigating The On-Screen Menus; Using The On-Screen Menu - Insignia NS-CL19C User Manual

Insignia NS-CL19C 19" Combo DVD/LCD TV
Using repeat play
You can repeat tracks or the entire CD using
repeat play.
To use repeat play:
1 While the CD is playing, press REPEAT to
scroll through the options:
• Single - (play current track)
• Repeat One - (repeat current track)
• Repeat Folder - (repeat current folder)
• Folder - (play current folder)
2 To stop repeat playback, do one of the
following:
• Press REPEAT until "Folder" disappears
from the screen.
• Press STOP twice.
• Eject the CD.
Changing the audio mode
To change the audio output of a
multi-channel CD:
• During CD playback, press AUDIO. The
setting changes each time you press the
button:
• Mono Left
• Mono Right
• Mix-Mono
• Stereo
Selecting a track for playback
To select a specific track for playback:
• After you load a CD into the player, and after
the player finishes reading the disc, press the
number buttons to enter the track number,
then press PLAY/ENTER to play the track.
Tip
If the track number is under 10, press buttons 1-9
to select it. If the track number is 10, press 10+
once, then button 0 to select it. If the track number
is over 10, press 10+ once, then a button 1-9.

Playing a JPEG disc

To play a JPEG disc:
1 Press POWER to turn on the player.
2 Press TV/DVD to select DVD.
3 Press OPEN/CLOSE to open the disc
tray.
4 Place the disc in the disc tray, then press
OPEN/CLOSE to close the disc tray. The
disc navigation menu opens.
5 Press to select the file you want, then
press PLAY/ENTER to confirm. The
slideshow begins.
6 During playback:
• Press PAUSE/STEP on the remote, to
stop the picture and press PLAY/ENTER
resume normal play.
• Press
picture, and press
the next picture. Press repeatedly to
continue skipping back or forward.
PREV to skip to the previous
NEXT to skip to
www.insignia-products.com
• To completely stop disc playback, press
STOP twice.
7 Press OPEN/CLOSE to remove the disc.

Customizing TV settings

Opening and navigating the on-screen
menus

Using the on-screen menu

Your TV has an on-screen menu that lets you
adjust TV settings, such as video and audio
settings.
To use the on-screen menu:
1 Press MENU on the TV or remote control,
then press VOL+/VOL- to display the menu
you want.
2 Press CH+/CH- to enter the menu and to
highlight option you want, then press VOL+/
VOL- to change the setting.
3 If a submenu is available, press VOL+ to
enter the submenu, the press VOL+/VOL- to
change the setting.
4 Press MENU or EXIT to close the on-screen
menu.

On-screen menus

On-screen
Options
menu
TUNING CHANNEL–The current channel selected. Press
VOL+/VOL- to change the setting.
CHANNEL LABEL–Lets you add a label to a
channel.
CHANNEL LOCK–Lets you lock a channel.
SKIP–Setting this to ON causes the current
channel (see CHANNEL above) to be skipped
on the channel list. You can select a skipped
channel by inputting the channel number using
the number keys.
AFC–Auto frequency control. Select ON to
automatically improve image quality.
FINE TUNE–Use to manually adjust tuning to
improve image and sound quality. Do not use
unless reception is poor.
ANTENNA–Selects the TV antenna source (AIR
or CATV).
AUTO PROGRAM–Automatically sets up a list
of the channels available in your area for the
antenna type selected. For more information,
see "Programming channels into memory" on
page 11.
15