Using The Blower - Samsung VC-77 Series Operating Instructions Manual

USING THE BLOWER

To blow out dust in crevice or corners you can use this function for your convenience.
Located on the rear side of the cleaner.
1) Disconnect the hose clamper from the
body of the cleaner.
3) Remove the blow hole cap from the
body of the cleaner.
NOTE:
Don't use your vacuum-cleaner outdoors.
USING THE MITE KILLER
1) Disconnect the body connector from the body
of the cleaner.
2) Shut the hose connection cover until tone is
heard.
• Your vacuum-cleaner is not malfuctioning if it
starts to operate when the hose connection
cover is closed. This will happen if the
vacuum-cleaner was on when the hose was
removed.
3) Mite killer lamp on.
Insect and germ killing work is started.
It will continue for 2 to 5min and the process
stops automatically.
(EXCEPT HANDLE CONTROL TYPE)
2) Open the tool storage cover.
4) Connect the hose clamper to the blow
hole.
(OPTIONAL)
4
EN-4
MITE KILLER LAMP