Using Flof To Select A Page (Depending On The Model); Storing Teletext Pages (Depending On The Model) - Samsung COLOUR TELEVISION Owner's Instructions Manual

Using FLOF to Select a Page
The various topics included in the teletext pages are colour-coded,
and can be selected by pressing the coloured buttons on the remote
control.
1
Display the teletext contents page by pressing the TTX/MIX
( ) button.
2
Press the coloured button corresponding to the topic that you
wish to select;the available topics are given on the status line.
Result: The page is displayed with other coloured information
that can be selected in the same way.
3
To display the previous or next page, press the corresponding
coloured button.
4
To display the subpage, see the following steps.
N Press the
(sub-page) button.
Result: The available subpages appear.
N Select the required sub-page. Sub-pages can be scrolled by
using the TURBO (Red) or S.MENU (Green) button.
Storing Teletext Pages
You can store up to four teletext pages to display them later at
leisure.
1
Select the LIST mode using the
Result: Four 3-digit numbers are displayed in different
colours.
➣
The button is used to switch between the LIST and
FLOF modes.
2
Press the coloured button corresponding to the page that will be
replaced.
3
Enter the new page number using the numeric buttons.
4 2
Repeat steps and
different coloured button each time.
5
Press the (store) button until the corresponding blocks blink.
(depending on the model)
button.
3
for each page to be stored, using a
(depending on the model)
39
ENG