Insignia NS-HD01 Quick Setup Manual page 2

Insignia hd radio portable player quick setup guide

Hide thumbs Also See for NS-HD01:

Step 3 Understanding radio modes

Your radio has three radio modes: analog (FM), HD Radio, and RBDS (Radio Broadcast Data System).

The analog (FM) mode is the standard

mode. The FM radio signal is an analog

signal. When receiving an FM signal, the

"FM" icon appears on the display.

Step 4 Using the armband

1 Slide your HD Radio Portable

Player into the armband pocket.

The HD Radio mode is the new, digital mode.

Many HD Radio stations have several

sub-channels called "Multicast Channels." When

receiving an HD Radio signal, the "HD" icon and

the channel number appear on the display.

2 Wrap the armband around your

upper arm with the radio facing out.

Registered in some countries. All other products and brand names are trademarks of their respective owners.

HD Radio™ and HD Radio logos are proprietary trademarks of iBiquity Digital Corporation.

RBDS (Radio Broadcast Data System) mode provides additional functionality

to FM radio reception by transmitting encoded analog information with the

FM radio signal. This signal is decoded by an RBDS receiver and can provide a

range of informational features including the station's name. The RBDS text

is usually centered. When the text fills the display, it begins scrolling. When

receiving an RBDS signal, the "RBDS" icon appears on the display.

3 Slide the strap through the loop,

then pull the strap to tighten it.

Back of arm

4 Fold the strap back over itself so it sticks to the

velcro strip and holds the armback in place.

ENGLISH 09-0517

Front of arm