Philips Kala User Manual page 10

TO SCREEN CALLS
Call screening allows you to listen to messages being left on you answering machine.
You may then choose to intercept the call or not by pressing
To start call screening, press
You can hear the caller through the earpiece of your handset.
To stop call screening, press
For permanent adjustment, refer to the call screening section in the chapter concerning
programming the answering machine on page 11.
TO SWITCH ON/OFF THE ANSWERING MACHINE BY REMOTE CONTROL
Before using the remote access code to check calls on your answering machine, you must first
record a personal remote access code. The code is made up of 4 digits of your choice (see
programming the answering machine on page 11).
After you have recorded your remote access code.
Dial your
Wait for the
telephone
ð
number
Dial your
telephone
ð
number
TO PLAYBACK MESSAGES BY REMOTE CONTROL
Dial your
ð
telephone
number
* If the access code is correct, the messages are read automatically.
TO MANIPULATE THE MESSAGES BY REMOTE CONTROL
To delete the current message
To listen to the previous message
To listen to the next message
USING YOUR TELEPHONE
.
.
ð
9th ring
Press
During the
ð
outgoing
message
Press
The answering
ð
machine answers
ð
ð
ð
Enter your
remote access
+
code
Enter your
remote access
+
code
Enter your
remote access
+
code
press the key on your telephone.
press the key twice on your telephone.
press the key on your telephone.
.
Your answering
ð
machine has been
+
Your answering
ð
machine has been
+
Hang up at the
ð
*
end of the call
switched on
switched off
9