AEG HD 8760 Operating And Installation Instructions page 16

• Mark the wall with a centre line, this will aid mounting procedure (1),
position the template so that the mid line printed on the template
matches with the centre line previously marked, the lower side of
the template corresponds to the lower side of the hood once
mounted (2).
• Drill two holes Ø 8mm and fix the support bracket with two wall
plugs and screws (3).
• Remove the front panels (see paragraph “Removing the front
panels”).
• Hang the hood (4) adjust its position (5-6) and from the inside of the
hood sign two points for definitive fixing (7), remove the hood and
drill two holes Ø 8mm (8), fit two wall plugs, hang the hood again
and fix it securely with two screws (9). Cover the drill holes for
screws with the two screw caps provided.
(5x18)
6
5
9
16
4
(5x18)
6
5
Fig. 11
4
3
8
8
7
2
1