At The End Of The Programme - AEG LAVAMAT 12710 TURBO ELECTRONIC Instruction Booklet

How to wash

At the end of the programme

The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The END light comes on in the pro-
gramme progress display.
If the RINSE HOLD option has been selected, the water must be emp-
tied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by selecting the SPIN SPEED and depressing START/PAUSE button
- or by turning the selector dial to O and then to DRAIN and pressing
the START/PAUSE button again. In this case the water will be emptied,
but the laundry is not spun.
Turn the selector dial to O/OFF to switch the machine off.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid any forgotten items
being damaged in a subsequent wash (e.g. shrinking) or their colour
running into a load of whites.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
29