Operation - Lightwave JSJS LW270 Operation Manual

3. Using a LightwaveRF Connect Remote press one of
the 'OFF' buttons; the amber light on the socket will
ash to con rm that the remote is now unpaired.
Clearing Memory (will remove all paired remotes):
1. Ensure the socket is connected and ready with a
mains power line and load.
2. Press and hold down the 'MANUAL' button on the
socket until the blue and amber LEDs ash
alternately. The socket is now in learning mode.
3. On the socket press and hold down the 'MANUAL'
button again until the blue and amber LEDs ash
simultaneously, then press (don't hold) the 'MANUAL'
button a further time; the amber LED will ash
con rm that the memory has been cleared.

OPERATION:

Switch 'ON/OFF'
'MANUAL' Buttons (switch 'ON/OFF' function)
Press once to switch 'ON' (Blue LED indicator will light
ON).
Press once again to switch 'OFF' (Amber LED indicator
will light ON).