Samsung SV-657GX Instruction Manual page 15

Audio Dubbing a Pre-recorded Cassette
(SV-657GX Only)
With the Audio Dubbing function, you erase the
previously recorded sound and replace it with a
new soundtrack from:
A CD player
A microphone connected to a sound system
A cassette player
Restriction:
Audio dubbing is applicable only to the longitudinal
audio track (normal audio).
1 Connect an RCA audio cable to the appropriate
output on your sound system (CD/cassette player for
example).
2
Connect the other end of the RCA audio cable to the
audio input connectors (L, R) on the front of your
VCR.
3
Insert the pre-recorded cassette on which the audio
❿
track is to be replaced, and press the
GB
playback.
4
Find the scene that you want to over-dub and press
❿
ll on the remote control.
5 Press DUB.
Result: Your VCR is now in the Audio dubbing Pause
mode.
6 On the sound system, locate the point on the CD or
cassette at which you wish to start playback.
Example: The track that you wish to record on the
cassette.
7
When you are ready:
Start playback on the sound system
Press REC on the remote control.
Result: The soundtrack is replaced on the pre-
recorded cassette.
The new sound will be recorded on the
normal sound track of the tape, and the
original sound will remain on the Hi-Fi
sound track.
To hear the new sound and original sound
mixed together, press the Audio button on
the remote control until the MIX option is
displayed (see page 33).
28
Using the TV Buttons on the Remote
Control (SV-657GX/SV-655GX Only)
Your VCR remote control will work with Samsung
televisions and compatible brands.
To determine whether your television is compatible,
follow the instructions below.
1
Switch your television on.
2 Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure
code corresponding to the brand of your television,
by pressing the appropriate numeric buttons.
Brand Codes Brand
SAMSUNG 01 to 06 PHILIPS
AKAI 09, 23 SABA
GRUNDIG 09, 17, 21 SONY
LOEWE 02 THOMSON 13, 14, 24
PANASONIC 08, 23 to 27 TOSHIBA
Result: If your television is compatible with the
remote control, it is switched off. It is now
programmed to operate with the remote
ll to start
control.
If several codes are indicated for your television
brand, try each one in turn until you find one that
works.
When you change the batteries in the remote
control, you must reprogramme the code,
following the same procedure.
You can then control the television using the following
buttons.
Button Function
TV STANDBY/ON Used to switch the television on
and off.
TV or VCR Used to switch between the TV
and VCR modes. Only the VOL
+ –
( or ) and TV STANDBY/ON
buttons are operational in VCR
mode.
-/-- Used to enter a two-figure
programme number.
Example: For programme 12,
press -/-- followed by numeric
buttons 1 and 2.
INPUT Used to select an external
source.
+ –
VOL or Used to adjust the volume of the
television.
PROG/TRK Used to select the required
(" or ❷)
programme.
DISP./ Used to switch between an external
source and the television tuner.
The various functions will not necessarily
work on all televisions. If you encounter
problems, operate the television directly.
Auto Power Off
The Auto Power Off feature automatically turns off
your VCR if no signal is received and you do not
press any button for the selected time.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2
Press the corresponding
select the
EASY OPERATION
3
Press the OK button to select this option.
Result: The EASY OPERATION
4
Press the corresponding
AUTO POWER OFF
Codes
5 Press the ❿ button, until you select the time of Auto
02, 20, 22
Power off interval.
13, 14, 22 to 24
OFF 2HOUR
15, 16
6 On completion, press MENU twice to exit the menu.
07, 16 to 19, 21
Technical Specifications
Design and specifications are subject to change without notice.
MODEL
Format
Heads
Receiving channel
Television system
Luminance
Colour system
Tape speed
Recording/playback time
REW time
VIDEO
Input
Output
Signal-to-noise ratio
Horizontal resolution
AUDIO
Input
Output
Wow and flutter (WTD)
Signal-to-noise ratio
Frequency response
Power requirement
Power consumption
Operation temperature
Operation humidity
Weight
Dimensions (WxHxD)
ECO Mode-Reducing Standby power
consumption
Low Power Mode reduces the Standby power
consumption of the VCR when in Standby mode.
Useful, for example, when you are away from the
house on holiday. It saves actually turning the VCR off.
1
Press MENU on the remote control.
or ➛, ❿ buttons to
,
" ❷
Result: The programming menu is displayed.
option.
2
Press the corresponding
select the USER SET
menu is displayed.
3
Press the OK button to select this option.
Result: The
or buttons, until the
" ❷
option is selected.
4 Press the corresponding
ECO. MODE
5 Press the ❿!button to turn LOW(3Watts) mode on.
3HOUR Now, when the VCR is standby mode the front
display panel will shut off. Even the clock disappears.
By pressing the VCR STANDBY/ON (STANDBY/ON)
button again the display panel will reappear.
6
On completion, press MENU twice to exit the menu.
SV-657GX/SV-655GX/SV-651GX SV-455GX/SV-451GX/SV-255GX/SV-251GX
VHS PAL standard VHS PAL standard
Video: 4 rotary heads Video: 4 rotary heads (SV-445G/SV-441G)
Video: 2 rotary heads (SV-245G/SV-241G)
Hi-Fi audio: 2 rotary heads
Audio/Control: 1 stationary head Audio/Control: 1 stationary head
Erase: 1 full track erase head Erase: 1 full track erase head
VHF-I, VHF-III, UHF, Interband/Hyperband VHF-I, VHF-III, UHF, Interband/Hyperband
STANDARD B/G-D/K-A2/NICAM STANDARD B/G-D/K
FM azimuth recording FM azimuth recording
PAL/MESECAM/NT4.43: Down converted subcarrier PAL/MESECAM/NT4.43: Down converted subcarrier
phase shifted direct recording NTSC PB on PAL TV phase shifted direct recording NTSC PB on PAL TV
SP 23.39 mm/sec SP 23.39 mm/sec
LP 11.69 mm/sec LP 11.69 mm/sec (SV-445G/SV-441G)
SP 3 hours (E-180 Tape) SP 3 hours (E-180 Tape)
LP 6 hours (E-180 Tape) LP 6 hours (E-180 Tape) (SV-445G/SV-441G)
About 60 sec in REW with E-180 About 60 sec in REW with E-180
0.5 to 2.0 Vp-p; 75 ohm unbalanced 0.5 to 2.0 Vp-p; 75 ohm unbalanced
1.0 ± 0.2 Vp-p; 75 ohm unbalanced 1.0 ± 0.2 Vp-p; 75 ohm unbalanced
Better than 43 dB (SP) Better than 43 dB (SP)
More than 240 lines More than 240 lines
-8 dBm, 47 Kohm unbalanced -8 dBm, 47 Kohm unbalanced
-8 ± 3 dBm, 1 Kohm unbalanced -8 ± 3 dBm, 1 Kohm unbalanced
0.4% max (SP) 0.4% max (SP)
68 dB min (IHF A filter) 42 dB min (IHF A filter)
20Hz - 20kHz 100Hz - 8kHz
220-240V~ 50Hz 220-240V~ 50Hz
Approx. 17 watts Approx. 15 watts
41°F-104°F (5°C-40°C) 41°F-104°F (5°C-40°C)
10%-75% 10%-75%
2.8 Kg (net) 2.8 Kg (net)
360 x 94 x 240 mm 360 x 94 x 240 mm
or ➛, ❿ buttons to
,
" ❷
option.
USER SET menu is displayed.
or buttons, until the
" ❷
is selected.
GB
29