Connecting Component Video; Connecting An Hdmi Device - Insignia NS-LCD32 User Manual

Insignia NS-LCD32 LCD TV
Connect the Audio/Video cables between the
Audio (L/R)/Video jacks on the television and
camcorder or video game console.
Note
Cables are often color-coded to connectors.
Connect red to red, white to white, and yellow to
yellow.
Note
• For better video, you can use the S-video
terminal if your source supports it.
• The S-video terminal shares the same audio
jacks with VIDEO1 and has priority over the
VIDEO1 and VIDEO2 jacks. To use a device
connected to the video jacks, disconnect any
plug from the S-video terminal.
To play the camcorder:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press or
press OK to confirm.
3 Turn on your camcorder and set it to output
mode.
4 Insert a videotape, then press
Note
For more information about using your camcorder
or video game console, see your user guide.

Connecting an HDMI device

TV right side
Device with HDMI output
Connect the HDMI cable between the HDMI
interface on the television and HDMI output on
the device.
To play from the device using HDMI:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press or
then press OK to confirm.
to select Composite-2, then
.
HDMI cable
to select HDMI-1 or HDMI-2,
www.insignia-products.com
3 Turn on your device and set it to the correct
mode.
Note
For more information about using your HDMI
device, see your user guide.

Connecting component video

TV right side
Device with component video
To connect the device:
1 Connect the component video cable between
the Y, Cb/Pb, Cr/Pr input jacks on the
television and the Y, Cb/Pb, Cr/Pr output
jacks on the device.
2 Connect the audio cable between the AUDIO
input jacks on the television and the AUDIO
output jacks on the device.
Note
Cables are often color-coded to connectors.
Connect red to red, white to white, green to green,
and blue to blue.
To play component video from a device:
1 Turn on your television, then press the INPUT
button. The SOURCE INPUT menu opens.
2 Press or
Component-2, then press OK to confirm.
3 Turn on your device and set it to the correct
mode.
Note
For more information about using your component
video device, see your user guide.
Component video cable
Audio cable
to select Component-1 or
9