Sony VPL-VW6 Operating Instructions Manual page 41

Lamp Control
Switches the lamp wattage during projection.
High: Normal wattage.
Low: Enhances the black by reducing the lamp wattage.
Tip
When you switch from "Low" to "High", the number of turns of the fan
increases, and the fan noise becomes slightly louder.
c
CIl
s·
eQ
Max Min
50
I
OfT: Normal contrast.
Advanced Iris
Switches the iris function during projection.
Auto!: Automatically switches to an optimum iris according to a
projected scene. The contrast of the scene is emphasized most.
Auto2: An optimum iris becomes smaller than when set to "Auto I". The
contrast of the scene becomes reduced.
Sensitivity: If "Auto I" or "Aut02" is selected, either "Recommend",
"Fast", or "Slow" can be selected according to the desired response
speed with Sensitivity Mode.
Manual: Manually adjusts the Iris.
Cinema Black Pro
Contrast
Adjusts the white area of pictures (white level).
The higher the setting, the greater the contrast. The lower the setting, the
lower the contrast.
You can make adjustments by pressing the CONTRAST+/- on the
remote control.
Brightness
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing the BRIGHTNESS+/- on the
remote control.
Color
Adjusts the intensity of the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Hue
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Color Temp.
Adjusts the color temperature.
High: Gives white colors a blue tint.
Middle: Gives a neutral tint between "High" and "Low".
Low: Gives white colors a red tint.
Customl, Custom2, Custom3: Enables you to adjust, set, and store
your favorite color temperature.
Sharpness
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS+/- on the
remote control.
41