- IF YOU HAVE A PROBLEM
PROBLEM
Motor does not start.
Suction force is gradually
decreasing.
Cord does not rewind fully.
Vacuum cleaner does not
pick up dirt.
Low or decreasing suction
This Vacuum cleaner is approved the following.
EMC Directive : 89/336/EEC , 92/31/EEC and 93/68/EEC
Low Voltage Safety Directive : 73/23/EEC and 93/68/EEC
CAUSE
No power supply.
Thermal cut-out.
Nozzle, suction hose or tube
is blocked.
Check that the cord is not
twisted or wound unevenly.
Crack or hole in hose.
Filter is full with dust.
EN-10
REMEDY
Check cable, plug and socket.
Leave to cool.
Check for blockage and
remove.
Pull the cord out 2-3m and
push down the cord rewind
button.
Check hose and replace if
required.
Please check filter and, if
required, clean as illustrated
in the instructions.
0