Table of Contents
Advertisement
Installation Instructions
* Don't place the projector in the following conditions. It may cause malfunction or product damage.
Provide proper ventilation for this projector.
The projector is equipped with ventilation
holes(intake) on the bottom and ventilation
holes(exhaust) on the front. do not block or
place anything near these holes, or internal
heat build-up may occur, causing picture
degradation or damage to the projector.
Never push projector or spill liquid of any
kind into the projector.
Place this projector in adequate temperature and humidity conditions.
Install this projector only in a location where adequate temperature and humidity is available.
(refer p.46)
Don't place the projector where it can be covered with dust.
This may cause overheating of the projector. Clean the Air filter periodically.
13
Do not place the projector on a carpet, rug
or other similar surface. It may prevent a
adequate ventilation of the projector bot-
tom. This product should be mounted to a
wall or ceiling only.
Leave an adequate distance(30cm or more)
around the projector.
Advertisement
Table of Contents
