Rate Conversion Dubbing (Dubbing At A Modified Bit Rate) - Toshiba RD-XS52SU Owner's Manual

Editing
HDD DVD-RAM DVD-R
Rate conversion dubbing
You can reduce the recorded picture or sound rate when copying. This procedure enables content originally
recorded onto the HDD at high rate setting to be dubbed onto a DVD-RAM disc at a reduced bit rate.
Use the Rate conversion dubbing when
• you recorded a lengthy content on the HDD using the manual high rate, and it is too large to dub in the DVD-RAM disc.
• you recorded a title with setting the "DVD compatible mode" (
DVD-R disc for that title, or you used another recorder to record a title in a DVD-RAM disc, and you want to create a
DVD-R disc for that title (Set "DVD compatible mode" to "Main" or "SAP" then execute this procedure).
The Rate conversion dubbing can be performed in two different ways: part by part or multiple parts in one time. (To
dub multiple parts in one time, the same rate is applied to all parts. You cannot set different rate to each part.)
Preparation
• Press HDD or DVD button to select a disc containing the parts that you want to dub.
Rate Conversion Dubbing for Part by Part
OPEN/CLOSE
TV
TV /VIDEO CH VOLUME
HDD TIMESLIP
INSTANT REPLAY
Start
EASY
NAVI
VCR Plus+ REC MENU
EXTEND
ENTER
PAUSE STOP
REC
112
1
Perform steps 1 and 2 on
2
Press QUICK MENU.
CH
DVD
QUICK MENU
INSTANT SKIP
CONTENT MENU
3
Press
dubbing", then press ENTER.
ENTER
PLAY
QUICK MENU
(Dubbing at a modified bit rate)
page 162) to "Off", and you want to make a
Quick Menu appears.
/ to select "Rate conversion
"CONTENT MENU Rate Conversion Dub" appears.
e.g.
CONTENT
Rate conversion dubbing
MENU
2004/10/30 08 : 00pm TV : 12
Select Quick Menu to modify bitrate.
Higher bitrate for copied media will not improve quality.
All chapter marks will be deleted.
page 106.
(0:52:40) Original
Copy
(Saves Original)
Same Disc
(Saves Original)
Original Copy Result
LP 2.0 LP 2.0
D/M2 D/M2