IBM Flex System FC5022 User Manual page 19

TABLE 1
Feature
Operating humidity
Nonoperating
Humidity
Power dissipation
Operating voltage
Dimensions
Weight
Topology
Data protection
Supported Fibre
Channel features and
protocols
Other features
NOTE
The IBM Flex System FC5022 2-Port 16Gb FC Adapter conforms to environmental and power
specifications for the supported compute nodes and IBM Flex System chassis in which they are installed.
Refer to the documentation provided for these products for more information.
Introduction
Adapter specifications (Continued)
Description
20% to 80%
8% to 80%
8.5 W maximum
8 W nominal
Per PCIe 2.0 specifications
4.19 in. (106.5 mm) depth
3.34 in. (84.9 mm) width
1.64 in. (41.5 mm) height
.31 pounds (140 grams)
Switched
Point-to-Point (N_Port)
Cyclic redundancy check (CRC) on PCIE and line-side links
ECC within the ASIC memory blocks (2-bit detection and 1-bit correction)
Error correction code (ECC) and parity through the ASIC
•
SCSI over FC (FCP)
•
FCP2
•
FCP3
•
FC-SP Authentication
•
NPIV
•
Quality of Service (QoS)
•
Target rate limiting
•
Boot over SAN
•
Fabric-Based Boot LUN Discovery
•
I/O Interrupt Coalescing
•
T10 Data CRC
•
Multiple Priority (VC_RDY)
•
Frame-Level Load Balancing
•
Persistent Binding
•
Fabric-Based Configuration
•
vHBA
•
ASIC Flip-flops Parity Protected
•
T10 Data CRC
•
ECC Memory Parity Protected
Features and specifications
1
9