Connecting A Camcorder; Connecting A Dvd Player - Insignia NS-32LCD User Manual

Insignia NS-32LCD 32" LCD TV

Connecting a camcorder

Warning
Make sure that you turn off and unplug your TV
before installing devices.
To connect and play video from a camcorder:
1 Plug the audio/video cable into the AUDIO L,
AUDIO R, and VIDEO jacks on the back of
your TV.
2 Plug the other end of the audio/video cable
into the audio and video out jacks on the
camcorder.
3 Turn on your TV.
4 Press the INPUT button repeatedly to select
Composite 2.
5 Turn on the camcorder, then set it to output
mode. See your camcorder documentation
for more information.
6 Insert a tape into the camcorder, then press
the Play button on the camcorder.
TV
Y=yellow (video)
W=white (audio left)
R=red (audio right)
Video cable
OUT
IN
Audio cable
Y
R
W
VIDEO L- AUDIO - R
www.insignia-products.com

Connecting a DVD player

Warning
Make sure that you turn off and unplug your TV
before installing devices.
To connect a DVD player and play a DVD:
1 Plug the HDMI cable into the HDMI jack on
the back of your TV and to the HDMI Output
jack on the back of the DVD player.
2 Turn on your TV.
3 Press the INPUT button repeatedly to select
HDMI.
4 Turn on the DVD player.
5 Insert a DVD, then press the Play button on
the DVD player.
TV
HDMI
Output
Note
If the DVD player has DVI output only, use a
DVI-to-HDMI adapter cable (not supplied) to
connect the DVD player to the HDMI jack on the
back of your TV. Then connect the audio cable to
the D-SUB AUDIO IN jack on the back of your TV.
11