Zanussi ZNC12X User Manual page 17

6. Fix the oven in position with the
screws provided. The fixing points are
located on the top and bottom corners
of the oven.
7. It is important to ensure that the
installation of this product conforms to
the instructions in this operation
manual and the hob or conventional
oven manufacturer's installation
instructions.
SAFE USE OF THE APPLIANCE
If fitting the microwave in position B or C:
The cupboard must be a minimum of
•
500 mm (E) above the worktop and
must not be installed directly above a
hob.
This appliance has been tested and
•
approved for use near domestic gas,
electric and induction hobs only.
Sufficient space between hob and
•
microwave should be allowed to
prevent overheating of microwave
oven, surrounding cupboard and
accessories.
Do not operate the hob without pans
•
when the microwave oven is operating.
Care should be taken when attending
•
to the microwave oven while the hob is
on.
Chimney
Position A
Position B
Conventional
oven
Position WxDxH
A 560x550x360
B + C 560x300x350
B + C 560x300x360
D 560x500x350
D 560x500x360
Connecting The Appliance To The Power
Supply
The electrical outlet should be readily
•
accessible so that the unit can be
unplugged easily in an emergency.
The socket should not be positioned
•
behind the cupboard.
The best position is above the
•
cupboard, see (A).
•
When not connecting the power supply
cord to position (A) it should be
removed from the support clip and
routed under the oven.
Connect the appliance to a single
•
phase 230V/50Hz alternating current
via a correctly installed earth socket.
zanussi 17
Chimney
Position C
Position D
E
D
Chimney
50
15
15
40
40