Setup Menu - Panasonic SC-HTB680 Operating Instructions Manual

Setup menu

Press [SETUP] repeatedly to select
the setup item.
Press [3, 4] repeatedly to select
the desired setting and then press
[OK].
Dims the display after
5 seconds of inactivity.
DIMMER
ON
OFF
The main unit
automatically is turned off if
AUTO there is no audio input and
POWER when you do not use it for
DOWN approx. 20 minutes.
ON
OFF
Sets the volume limit to 50
when you turn on the main
unit although the volume is
VOL
set to above 50 before it is
LIMITATION
turned off.
ON
OFF
This function allows you to
connect a paired
Bluetooth
the main unit is in standby
mode.
BLUETOOTH
ON
STANDBY
OFF
The main unit will be
turned on automatically
when you connect a paired
Bluetooth
24
RQT9916
device when
®
device.
®
Change the Bluetooth
connection link mode to
suit the connection type.
Make sure to disconnect
the current connected
LINK device ("BLUETOOTH
MODE READY" is indicated on the
display).
MODE 1: Emphasis on
connectivity.
MODE 2: Emphasis on
sound quality.
Turn on the VIERA Link
function.
ON
OFF
Select "OFF" when your
HDAVI Control device does
VIERA not work correctly with this
LINK system. ARC will be
disabled. Connect an
optical digital audio cable.
Turn off all connected
devices and then turn them
on again after changing the
setting.
≥ The default setting is underlined. Changed settings will be
kept until it is changed again, unless otherwise indicated.
®