Building-In - AEG LAVAMAT 14700 VIT TURBO Instruction Booklet

The environmentally friendly washer-dryer

Hide thumbs Also See for LAVAMAT 14700 VIT TURBO:

Table of Contents

Building-in

With the appliance installed adjust all four feet ensuring the machine

is stable, and a clearance of approximately 5 mm is left between the

top of the machine and the underside of the worktop.

A final check for stability should be carried out with the machine on

spin with a load, this will identify the need for any further fine adjust-

ment to the feet.

A strip of beading approximately 605 mm W, x 5 mm H, x 25 mm D

must be screwed down into the base directly in front of the machine's

feet, this will provide additional security.

If required an additional door magnet, part number 1242394-00/3 and

disc, part number 1242393-00/5 are available from spare parts.

Table of Contents