Building-In - AEG ÖKO-LAVAMAT 1271 T v.i. Instruction Booklet

124972910•LAVAMAT1271Tvi 29-09-1999 10:08 Pagina 50

Building-in

This appliance has been designed to
be built into the kitchen furniture.
The recess should have the dimen-
sions shown in picture A.
Preparation and assembly of the door
The machine is originally pre-
arranged for the assembly of a
door opening from right to left.
In this case it is sufficient to screw
in the hinges (1) and the counter-
magnet (6) provided with the appli-
ance, at the right level (Fig. B).
a) Door
The dimensions of the door should
be:
- width
- thickness 16-22
The height (C-Fig. C) depends on the height of the adjacent furniture's base.
b) Hinges
To mount the hinges it is necessary
to drill two holes (dia. 35 mm, depth
14 mm) on the inner side of the
door. The distance between the holes
hobs fixing centres must be 416 mm.
The distance (B) from upper edge
of the door to the centre of the
hole depends on the adjacent fur-
niture's dimensions.
The required dimensions are given in the picture C.
The hinges will be fixed to the door by means of screws for wood (2-Fig. B).
50
595-598 mm
mm
6 0 0
A
6
1
7
2
5
1
3
3
8
2
B
35 Ø 12.5-14 depth
C
4