Samsung WF457ARG Series User Manual page 62

Troubleshooting
ERROR CODE
E2
tE
3E
2E
AE
AE4
AE3
AE5
8E
SF1
SF2
SF3
SUdS
For any codes not listed above, call 1–800–726–7864 (1–800–SAMSUNG)
62_ Troubleshooting
WF457ARG-03153A_EN.indd 62 WF457ARG-03153A_EN.indd 62
A jammed key.
A jammed key.
Try pressing the key to unjam it. If it remains jammed, contact customer service.
Contact customer service.
A temperature sensor problem.
Restart the cycle. If the code reappears, contact customer service.
A motor problem.
Restart the cycle. If the code reappears, contact customer service.
High/Low voltage detected.
Restart the cycle. If the code reappears, contact customer service.
A communication error between the SUB PBA and the MAIN PBA
Contact customer service.
A communication error between the Wi-Fi Module and the MAIN PBA
Contact customer service.
A communication error between the DR MODEM and the MAIN PBA
Contact customer service.
A communication error between the LCD Module and the MAIN PBA
Contact customer service.
A MEMS sensor problem.
Contact customer service.
A system error
Contact customer service.
Too much suds is
Too many suds are detected during the wash session. The unit is put on hold until
the amount of suds have been reduced. The unit will then go back to operating.
When it fi nishes washing, the "End" and "SUdS" codes will blink in turn.
MEANING & SOLUTION
The unit will then restart.
2012-03-09 2012-03-09 4:09:38 4:09:38