Table of Contents
Advertisement
SYMBOLS
Safety alert
CE conformity
Please read and understand all instructions
before operating the product, follow all
warnings and safety instructions.
Please read the instructions carefully before
starting the product.
Wear eye protection.
Wear ear protection.
Lubricate with air tool oil daily.
SPECIFICATIONS
Drilling capacity
No-load speed
Avg. air consumption
Maximum working pressure
Air inlet size
Air hose
Weight
A-weighted sound pressure
level
Sound power level
Vibration value
Uncertainty of measurement
Noise
emission
values
EN ISO 4871 and EN ISO 15744.
Vibration emission values are in accordance with
EN12096 and EN28662-1.
10 mm (3/8")
2,000/min
114 L (4 cfm)
6.3 bar (90 psi)
6.35 mm (1/4")
9.52 mm (3/8")
0.95 kg
92dB(A), k=3dB
103dB(A), k=3dB
1.5 m/s
2
0.27 m/s
2
are
in
accordance
APPLICATION
The product is designed for drilling, tapping, honing
and hole sawing. The features of the product include:
reversible and keyless air drill, durable lightweight
composite housing, variable speed trigger, exhaust, and
a quick coupler. Any other use is forbidden.
–
Top choice for service works that require a
compact, low profile application.
–
Precision machined gearing ensures maximum
power transfer and durability.
–
Lightweight body helps avoid fatigue during long
operation, ideal for drilling in hard-to-reach areas.
RESIDUAL RISKS
Even if you are operating this product in accordance
with all the safety requirements, potential risks of injury
and damage remain. The following dangers can arise in
connection with the structure and design of this product:
1. Health defects resulting from vibration and noise
emission if the product is being used over long periods
of time or not adequately managed and properly
maintained.
2. Injuries and damage to property due to broken cutting
attachments or the sudden impact of hidden objects
during use.
3. Danger of injury and property damage caused by
flying objects.
AIR SUPPLY AND OPERATION
■ Ensure air valve (or trigger) is in the "off" position
before connecting to the air supply.
■ Required air pressure of 6.3 bar (90 psi), and an air
flow according to specification.
■ Disconnect the product from the energy source before
changing accessories or making adjustments.
■ Connect the product to the air hose.
■ Press trigger to operate the product.
■ Do not use any additional force upon the product.
■ Do not allow product to free run for an extended period
of time as this will shorten its life.
Ensure the air supply is clean and does not exceed
6.3 bar (90 psi) while operating the product. Too high an
air pressure and unclean air will shorten the product's
with
life due to excessive wear, and may be dangerous
causing damage and/or personal injury.
3
WARNING
Advertisement
Table of Contents
