Resetting Or Removing Pairing; Care And Maintenance; Safety Information - I-Tech Arrow Lite User Manual

Last Number Redialing from Your Headset
Press the MFB on your headset twice.
IMPORTANT: The above functions are only applicable to mobile phones with Bluetooth Handsfree
Profile. Functionality varies depending on the mobile phone model you have. Please refer to your
mobile phone user guide for additional information.
Rejecting a Call (Handsfree Profile ONLY)
Press and hold the Volume Key then press the MFB key to reject the incoming call
Transferring a Call (Handsfree Profile ONLY)
Press and hold the Volume Key then press the MFB key to transfer the call from headset to your
mobile handset.

Resetting or Removing Pairing

You may reset the headset to its original settings anytime. To do this you also clear all current
pairing settings.
1. Insert the charger plug into the headset's charging socket
2. Press and hold either of the volume keys for 20 seconds until the status indicator flashes
purple rapidly.
3. Release the volume key.
4. Press and hold the volume key again until the status indicator is purple.
5. The headset is reset and will resume the charging mode.
Note: After resetting, all previous pairing settings are cleared.

Care and Maintenance

Headset
• Turn off your headset before placing it in your pocket or bag. If the MFB is accidentally
depressed, your mobile phone may place an unintended call.
• Do not expose the headset to liquid, moisture or humidity as it is not waterproof.
• Do not use abrasive cleaners to clean the headset.
• Do not expose the headset to extremely high or low temperatures.
• Do not leave your headset under the hot sun for a long time.
• Do not leave your headset near open flames such as cooking burners.
• Do not dispose of the headset in a fire as it will result in explosion.
• Do not bring your headset into contact with any sharp objects as this will cause scratches and
damage.
• Do not stick anything inside the headset as this may damage internal components.
• Do not attempt to disassemble the headset as it does not contain serviceable components.
• Do not pull or drag the earphone-wire with force.
• If you will not use the headset for a long period, please store it in a dry place that is free from
extreme temperatures and dust.
Built-in Battery
• Do not attempt to replace the headset's battery as it is in-built and is not changeable.
• Charge the battery in accordance with the instructions supplied with this user guide.
• Use only the charger supplied by the headset's original manufacturer to charge the battery.
Charger
• Use only the charger supplied by the headset's original manufacturer to charge the headset.
Other chargers may look the same, but they could be dangerous.
• Do not attempt to disassemble the charger as it may expose you to dangerous voltages or
other risks. Incorrect reassembly can cause electric shock when the headset is subsequently
used.
• Do not use the charger outdoors or in damp areas.
• Only charge the headset's built-in battery in accordance with the instructions described in this
user guide.
• Avoid charging the headset in extremely high or low temperatures.

Safety Information

• Check and observe local laws regarding the use of a mobile phone and headset while driving.
If you use the headset while driving, ensure your full attention and focus. It is your
responsibility to drive safely. Consider to pull off the road before making or answering a call.
• Never leave your headset above any air bag deployment area inside your car as serious injury
may result when an air bag deploys.
• Never allow children to play with the headset – small parts may be of choking hazard.
• Observe all signs and displays that require an electrical device or RF radio product to be
switched off in designated areas. These could include hospitals, blasting areas, and potentially
explosive atmospheres.
7 8