Set Up The Model Option - Samsung SH24TS6 Service Manual

2-3 Set up the Model Option

Step 1 : Preparing the remocon to main PBA option set
1 Remove the battery from the remocon.
st
2 Press the temperature raise/down button simultaneously and
nd
insert the battery again.
3 Make sure the remocon display shown as
rd
Step 2 : Second stage preparation of the remocon option set.
Note ; In case the wrong letter has been selected, continue to press the button until the correct letter appears.
1 st If the first stage number " " appears on the display, proceed to the second stage.
Every time the ! and & button, " " and "
2 nd
Whenever pressing the @, #, $, %, ^, *, (, ), 1, 2 button, the number increases from
3 rd
0~9(0123456789) and A, b, c, d, E, F each time.
Samsung Electronics
ex) Option No. : 085115-1d2340
! If the first number is
appear.
@ When pressing the
select one of them.
# When pressing the
select one of them.
$ When pressing the
select one of them.
% When pressing the
select one of them.
^ When pressing the
select one of them.
.
" each continue to appear.
, it is correct otherwise press
button ~
button ~
button ~
button ~
button ~
until
appear on the display,
appear on the display,
appear on the display,
appear on the display,
appear on the display,
2-5