ADDITIONAL SAFETY RULES
1.
Always be sure you have a firm footing.
2.
Hold the tool firmly.
3.
Keep hands away from rotating parts.
4. When driving into walls, floors or wherever "live" electrical wires may be
encountered, DO NOT TOUCH ANY METAL PARTS
OF
THE
TOOL!
Hold the tool only by the insulated grasping surfaces t o prevent electric shock
if you drive into a "live" wire.
5. Do
not touch the bit or the workpiece immediately after operation: they may
be extremely hot and could burn your skin.
Be sure no one is below when using the tool in high locations.
SAVE THESE INSTRUCTIONS.
4