Insignia NS-CLVR01 Quick Setup Manual

Congratulations on your purchase of a high-quality Insignia product.
Your NS-CLVR01 represents the state of the art in clock radio design
and is designed for reliable and trouble-free performance.
NOTE: Voice commands are recognized in English only

Package contents

• Clock radio
• AC power adapter
• AAA alkaline batteries (3)
• User Guide

• Quick Setup Guide

Setting up your clock radio
Installing the backup batteries
1 Open the battery compartment cover located on the bottom of
your clock radio.
2 Insert three "AAA" batteries, checking that the polarity (+ and -
ends of the batteries) matches the drawing inside the battery
compartment. We recommend the use of alkaline batteries for
longer life.
3 Close the battery compartment cover.
Connecting the AC power adapter
1 Plug the small DC power connector into the DC IN 9V jack on the
back of your clock radio.
2 Plug the AC adapter into an AC power outlet.
NOTE: Remove both the DC plug and the AC-IN plug to disconnect the AC power
adapter when not in use.
Use only the supplied AC power adapter to power your clock radio.
NS-CLVR01 Clock Radio with Voice Command
Features
Front view
LCD
display
Top view
Speakers and
microphone
Volume up button
Volume down button
Record button
Snooze/sleep/voice
command button
Back view
DC in jack
AUX in jack
FM antenna (wire)
Dimmer button
VC On/Off button
Alarm 2 button
Alarm 1 button
Minute button
Time set button Hour button
Quick Setup Guide
/source button
Tune down button
Tune up button
Preset button
Actual product may vary from image shown.