Other Information - Panasonic KX-PRW130 Manual

Other Information

Display message
The base unit didn't
respond. Please use
another handset to cancel
the registration later.
E2-04
The base unit is not
responding.
E3-01
Base unit is not selected.
E4-01
E4-02
The wireless access point
table is full.
E4-03
Copying data to other devices
Display message
You cannot send preset
ringtones.
E5-01
You cannot send this
ringtone. Please select an
mp3 file.
E5-02
The file was not found on
the SD card.
E5-03
No response
E5-04
20
Cause and/or solution
R There was a problem when deregistering your smartphone.
→ Use a handset to deregister your smartphone from the base
unit.
R There is a communication problem.
→ Make sure that the base unit and your wireless router are
turned on and functioning, turn your smartphone's Wi-Fi
feature off and then on again, and then try again.
R The base unit's IP address setting saved in your smartphone is
incorrect.
→ Confirm the base unit's IP address, and then edit the base
unit information stored in your smartphone (page 17) and
manually change the IP address setting to match the base
unit's IP address.
R Your smartphone has never connected to a base unit while
connected to this wireless network.
→ Follow the procedure described in "Adding a wireless
access point" to add the SSID (wireless network name) to
the list of SSIDs associated with the base unit (page 18).
R The app cannot save any more wireless access point settings.
→ Delete unnecessary wireless access points (page 18) and
then register your smartphone to the base unit again.
Cause and/or solution
R You tried to copy a preset ringtone to a handset.
→ You can only copy ringtones that are saved on your
smartphone's SD card or in its user-accessible internal
memory.
R Your smartphone's current ringtone is not an MP3 file.
→ Select an MP3 file as your smartphone's ringtone.
R The app could not find the current ringtone.
→ Configure your smartphone to use a ringtone that is an MP3
file saved on your smartphone's SD card or in its
user-accessible internal memory.
R The base unit or handset did not respond.
→ Make sure each device is turned on an functioning.
→ Make sure the DECT handset is within range of the base
unit.