Table of Contents
Advertisement
In order to confirm a selection, press the OK button. The
selected menu item is now run or executed.
In order to delete the OSD or to leave a called up program
press the Exit button.
The red, the green, the yellow and the blue coloured but-
tons on the remote control have different functions which
depend on the menu currently on the screen.
If a button in the OSD is coloured red, green, yellow or blue,
then the corresponding function is triggered by pressing
the same coloured buttons on the remote control.
At the bottom edge of every OSD screen, you will see notes
as to which controls you must press to make any settings
using the current menu.
First time installation
You are presented the set up wizard screen following first
switch-on.
You will normally find that the default settings are acceptable
as they are. You can also change the settings at any later time,
see page 58.
1. With the
the next menu item by pressing the
26
Note:
buttons select the desired country. Select
or
FIRST STEPS (INSTALLATION)
button.
Hide quick links:
Advertisement
Table of Contents
