Memory Features - Cadillac DTS 2011 Owner's Manual

Memory Features

On vehicles with the memory feature, the controls on
the driver door are used to program and recall memory
settings for the driver seat, outside mirrors, and the
steering wheel position, if the vehicle has the power tilt
wheel and telescopic steering feature.
Storing Memory Positions
To save into memory:
1. Adjust the driver seat, including the seatback
recliner and lumbar, both outside mirrors, and the
steering column.
2. Press and hold 1 until two beeps sound.
3. Repeat for a second driver position using 2.
1-8
To recall the memory positions, press and release 1
or 2. The vehicle must be in P (Park). A single beep
will sound. The seat, outside mirrors, and steering
wheel will move to the position previously stored for the
identified driver.
See Memory Seat, Mirrors and Steering Wheel on
page 2 6 for more information.
Easy Exit Driver Seat
The easy exit driver seat feature can move the seat
rearward and the power steering column, if equipped,
up and forward to allow extra room to exit the vehicle.
: Press to recall the easy exit seat position. The
vehicle must be in P (Park).
A single beep sounds. The driver seat will move
back, and if the vehicle has the power tilt wheel and
telescopic steering feature, the power telescopic
steering column will move up and forward.
See Memory Seat, Mirrors and Steering Wheel on
page 2 6 and Easy Exit Recall and Easy Exit Setup
under DIC Vehicle Customization on page 4 77 for
more information.