Using The Appliance For Drying - CDA ci971 Manual For Installation, Use And Maintenance

Using the Appliance for Drying

General
During drying cycles, the water tap must be turned on and the
drain hose correctly positioned.
This appliance can be set to perform wash only, dry only and
wash-and-dry programmes.
In the wash-and-dry programme, the appliance switches from
washing to drying automatically, with no need to use the controls
(at the end of the wash) to obtain the complete cycle.
Note:
• Only dry laundry or garments washed in an aqueous
solution and suitable for tumble drying.
• Do not dry fabrics which have been dry cleaned or had
stains removed with chemical solvents, wool or wool blend
fabrics which will be shrunk by the heat, very delicate
fabrics such as silk and synthetic curtains, fabrics which
may easily lose threads such as woolen yarn, padding and
loose-pile mats, or articles which contain foam rubber or
similar elastomers.
• Loads of laundry placed in the washer-dryer for drying
must not exceed 4kg in weight. The washer-dryer is
constructed to give the best results with loads which do not
exceed 4kg of dry weight of laundry.
• When washing programmes for resistant fabrics are set,
drying automatically takes place at 90°C (normal drying).
• In washing programmes for delicate fabrics, drying
automatically takes place at 60°C (gentle drying).
Therefore, in automatic wash-and-dry programmes, the
drying programme will depend on the washing programme
selected.
• In drying only programmes, the laundry must first have
21