Control Panel - Bosch WFLI2440EU Instruction Manual And Installation Instructions

Control panel

Start button
For starting the wash cycle
(programme must have been selected).
Buttons for additional options
(in addition to the programme if required)
Prewash: actuate Prewash
Reduced Ironing: Gentle spin
Rinse Plus: Extra rinse cycle
Wash Plus: More intensive wash
Additional options can be combined before
the programme is started.
The indicator lights of the buttons come on,
if the additional options are active.
Switching off the additional option:
Press the button again. Indicator light goes out.
See chapter Signal, page 18, for switching off acoustic signal or changing the volume.
Programme selector
For switching the machine on and off and
for selecting the programme.
Can be rotated in either direction.
The programme selector does not rotate while
the programme is running
sequence is electronically controlled.
Indicator lights for the programme status
Ready illuminate, if the programme is
selected.
Wash, Rinse, Spin illuminate when the
Start button is pressed and the particular
programme section is running.
End is lit when the programme has ended.
Indicator lights flash: Operation error.
Spin speed selector (if required)
For stepless setting of the spin speed;
must click in place at Rinse Hold.
the programme
5