Harbor freight tools central pneumatic series 2 in 1 flooring cleat staple nailer model 94446 assembly and operating instructions contractor series (12 pages)
16-GAUGE FINISH NAILER 66872 SET UP AND OPERATING INSTRUCTIONS ® Distributed exclusively by Harbor Freight Tools 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com Read and understand tool labels and manual. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
Keep bystanders, children, and minor or moderate injury. visitors away while operating the SKU 66872 For technical questions, please call 1-800-444-3353. Page 2...
Always wear eye protec- Do not use the tool if the Trigger tion. Wear ANSI-ap- does not turn the tool on or off. proved safety goggles. Any tool that cannot be controlled SKU 66872 For technical questions, please call 1-800-444-3353. Page 3...
Fasteners not identified for use with this tool by the tool manu- facturer are able to result in a risk of injury to persons or tool damage when used in this tool. SKU 66872 For technical questions, please call 1-800-444-3353. Page 4...
13. Refer to the tool maintenance instruc- operator and others in the work area. tions for detailed information on the proper maintenance of the tool. SKU 66872 For technical questions, please call 1-800-444-3353. Page 5...
Page 6
Anyone using vibrating tools regu- contains chemicals known [to the larly or for an extended period should State of California] to cause cancer, SKU 66872 For technical questions, please call 1-800-444-3353. Page 6...
SAVE THESE ASSEMBLY INSTRUCTIONS. Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. SKU 66872 For technical questions, please call 1-800-444-3353. Page 7...
Turn on the air compressor according to the manufacturer’s directions and allow it to build up pressure until it Incorporate an in-line oiler, shut-off cycles off. valve, regulator with pressure gauge, SKU 66872 For technical questions, please call 1-800-444-3353. Page 8...
The tool will only fire if missing parts. If any problems the Safety is resting on the workpiece prior to pulling the Trigger. SKU 66872 For technical questions, please call 1-800-444-3353. Page 9...
Nailer Maga- tach the Nozzle Cover onto the tang zine is empty. at the back of the Tail Cover (65). Depress the Pusher (63) to release the Magazine (82). SKU 66872 For technical questions, please call 1-800-444-3353. Page 10...
MAINTENANCE OR REPAIRS fasten. Be sure to keep hands, fin- ARE DONE (including clearing gers and other body parts away from jams): Nozzle. Press the Trigger (40) to activate the Nailer. SKU 66872 For technical questions, please call 1-800-444-3353. Page 11...
Note: These procedures are in addition to If a fastener is jammed in the maga- the regular checks and maintenance zine, pull the Pusher all the way SKU 66872 For technical questions, please call 1-800-444-3353. Page 12...
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not avail- able individually as replacement parts. SKU 66872 For technical questions, please call 1-800-444-3353. Page 14...
Page 16
BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. SKU 66872 For technical questions, please call 1-800-444-3353. Page 16...