Central Pneumatic 64142 Owner's Manual & Safety Instructions
  1. Manuals
  2. Brands
  3. Central Pneumatic Manuals
  4. Nail Gun
  5. 64142
  6. Owner's manual & safety instructions

Central Pneumatic 64142 Owner's Manual & Safety Instructions

16/18 gauge 3-in-1 nailer/stapler
Hide thumbs

Advertisement

Table of Contents

Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18g
64142
64142

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 64142 and is the answer not in the manual?

Questions and answers

Related Manuals for Central Pneumatic 64142

Summary of Contents for Central Pneumatic 64142

  • Page 1 (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference. Visit our website at: http://www.harborfreight.com 64142 64142 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged.

  • Page 2: Table Of Contents

    National pipe thread, straight NIOSH-approved dust mask/respirator. WARNING marking concerning WARNING marking concerning Risk of Eye Injury. Wear ANSI-approved Risk of Explosion. safety goggles with side shields. table a: Symbol Definitions Page 2 For technical questions, please call 1-888-866-5797. Item 64142...

  • Page 3: Safety

    A dust mask, non-skid safety shoes the Tool is able to discharge a fastener. and a hard hat must be used for the applicable conditions. Wear heavy- duty work gloves during use. Item 64142 For technical questions, please call 1-888-866-5797. Page 3...
  • Page 4 Always verify prior to using the tool that the air source has been adjusted to the rated air pressure or within the rated air-pressure range. SaVE tHESE inStructiOnS. Page 4 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 5 Tool. are factors which cannot be built into this product, but must be supplied by the operator. Item 64142 For technical questions, please call 1-888-866-5797. Page 5...
  • Page 6 If you feel any symptoms related to vibration (such in this manual. If abnormal vibration occurs, as tingling, numbness, and white or blue fingers), stop immediately. seek medical advice as soon as possible. SaVE tHESE inStructiOnS. Page 6 For technical questions, please call 1-888-866-5797. Item 64142...

  • Page 7: Specifications

    Exhaust Deflector air inlet plug Mode Switch trigger Magazine Latch Depth adjustment Knob Quick release Latch Workpiece contact nail indicator Magazine Item 64142 For technical questions, please call 1-888-866-5797. Page 7...
  • Page 8 Tool is disconnected and unpowered. 3. The air hose must be long enough to reach the work area with enough extra length to allow free movement while working. Page 8 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 9 Item 64142 For technical questions, please call 1-888-866-5797. Page 9...
  • Page 10 Page 10 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 11 (actuate). If it fails to act in the manner explained in bold, have it repaired by a qualified service technician. Item 64142 For technical questions, please call 1-888-866-5797. Page 11...

  • Page 12: Operation

    Only a skilled operator who is aware of the hazards and uses proper, safe work Single Sequential contact actuation practices should use contact actuation position position operation. Figure c: trigger Mode Switch positions Page 12 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 13 3. To load 16 Gauge Finish nails, insert the nails into the channel along the left-side of the Fixed Magazine. Refer to Figure E. FIG . 6 Figure E Item 64142 For technical questions, please call 1-888-866-5797. Page 13...
  • Page 14 Contact to discharge one fastener, move f. clean external surfaces with clean, dry cloth. and push Workpiece Contact again to discharge additional fasteners. g. Store indoors out of children’s reach. Page 14 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 15 • misalignment or binding of moving parts, safely and will also reduce wear on the Tool. • cracked or broken parts, and • any other condition that may affect its safe operation. Item 64142 For technical questions, please call 1-888-866-5797. Page 15...
  • Page 16 6. Test fire the Nailer/Stapler several times, checking for proper operation. 7. If the jam cannot be cleared using the methods above, have the tool serviced by a qualified technician. Page 16 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 17 LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO. Item 64142 For technical questions, please call 1-888-866-5797. Page 17...

  • Page 18: Parts List And Diagram

    Hex Bolt 36.3 Spring Hand Grip 36.4 Mode Switch Gasket 36.5 Trigger Plate C-ring Spring Filter Switch Unit End Cap 38.1 Seal Hex Bolt 38.2 Switch Cap Air Inlet Plug Page 18 For technical questions, please call 1-888-866-5797. Item 64142...
  • Page 19 Diagram Item 64142 For technical questions, please call 1-888-866-5797. Page 19...

  • Page 20: Warranty

    Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

Table of Contents