Using The Theatre Sync Function - Sony MHC-GN1300D Operating Instructions Manual

Using the THEATRE
SYNC function
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system's function to "DVD" and then
switches the TV's input source you have
set with just one button.
Preparing to use the THEATRE
SYNC function
Install the unit near the TV, then register
the TV's input source connected to this
system.
To select the TV's input
Hold down TV's input source
SLEEP and
press
0 No input source
(Default)
1 to 8 VIDEO 1 to VIDEO 8
9 COMPONENT 1
CLEAR COMPONENT 2
– COMPONENT 3
+ COMPONENT 4
The selected TV's input source is
memorized into the remote.
Operating the THEATRE SYNC
function
Point the remote in the direction of
the TV and this unit. Then, hold
down THEATRE SYNC until the TV
is turned on and the input source is
changed correctly.
If this function does not work, change the
transmission time. The transmission time
varies depending on the TV.
To change the transmission time
Hold down > and press the
numeric button.
Numeric Transmission time
button
1
2
3
4
5
6
7
8
Note
This function is only for Sony TV series,
however, some TV products may also not work.
Longer
transmission
time
25
GB