Table of Contents
Advertisement
Using advanced digital zoom
Use digital zoom in any Still mode to get up to an additional 4.2X magnification
beyond optical zoom. Combined zoom settings are from 12X to 50X.
1 Change the default setting from None to Continuous or Pause in the Setup menu,
page
36.
2 Press the Telephoto (T) button to the optical zoom limit (12X). Release the button,
then press it again to enter digital zoom range.
The Zoom indicator shows zoom status.
3 Take the picture or video.
NOTE: You cannot use digital zoom for video recording. You may notice decreased image quality when
using digital zoom for pictures. The blue slider on the zoom indicator pauses and turns red when the
picture quality reaches the limit for an acceptable 4 x 6 in. (10 x 15 cm) print.
Using the flip-up flash
Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.
Make sure you are within the flash range.
Flash
To change the flash settings, see
Flash-to-subject distance
Zoom position
Wide angle
Telephoto
www.kodak.com/go/support
When you press the Shutter
button halfway and flash is
needed, the flash
automatically opens.
Press the cover to close.
page
25.
Flash distance
1.6–15.4 ft (0.5–4.7 m) @ ISO, Auto
3.9–8.9 ft (1.2–2.7 m) @ ISO, Auto
Taking pictures and videos
13
Hide quick links:
Advertisement
Table of Contents
