JVC KD-AR870J Service Manual page 12

3.1.3 Removing the front chassis assembly
(See Figs.3 and 4)
• Remove the front panel assembly and bottom cover.
(1) Remove the two screws A on the front side of the main
body. (See Fig.3)
(2) Remove the two screws B on the both sides of the main
body. (See Fig.4)
(3) Release the joints d and joints e on the both sides of the
main body, and then remove the front chassis assembly to-
ward the front. (See Fig.4)
3.1.4 Removing the side panel
(See Fig.5)
Reference:
Remove the front panel assembly as required.
(1) Remove the two screws C and three screws D attaching
the side panel on the left side of the main body.
(2) Take out the side panel from the main body.
1-12 (No.MA249)
Front chassis assembly
A
Fig.3
B B
d
Front chassis assembly
Fig.4
C D D
D
Side panel
Fig.5
e
C