Echo CS-450P Instruction Manual page 5

SYMBOL FORM
Symbol form/shape Symbol description/application Symbol form/shape Symbol description/application
Carefully read the Instruction
manual
Wear eyes, ears and head
protection
Chain brake operation
Emergency stop
STOP
Choke control "Cold Start"
position (choke closed)
Oil and gasoline mixture
DECALS
Part Number X503-009750
CS-450P
WARNING!! Read and follow all
safety precaution in the instruction
manual. Failure to follow
instructions could result in serious
personal injury.
Part Number 890191-30131
TO AVOID KICKBACK
1. Hold the chain saw firmly with
both hands.
2. Don't let the nose of the guide bar
contact any obstruction.
3. Tip contact may suddenly move
the guide bar upward and back-
ward, which may cause serious
injury.
Chain oil fill
Chain oil pump
Chain oiler adjustment
Carburetor adjustment
- Low speed mixture
Carburetor adjustment
- High speed mixture
Carburetor adjustment
- Idle speed
Part Number X524-002290
REPLACEMENT BAR AND CHAIN
GUIDE BAR*
PART NO.
16" 16F0LD3366
18" 18F0LD3372
20" 20F0LD3378
*Or equivalent
Note: There may be other replacement
components for achieving kick-
back protection. For details, please
refer to the chain and bar combina-
tion sheet shown in the instruction
manual.
Locate these safety decals on your unit. The
complete unit illustration found in the "NOMEN-
CLATURE OF PARTS" section will help you locate
them. Make sure the decals are legible and that
you understand and follow the instructions on
them. If a decal cannot be read, a new one can be
ordered from your ECHO dealer.
5
CHAIN*
TYPE LINKS
OREGON 20LPX 66
OREGON 20LPX 72
OREGON 20LPX 78
CS-450P