10. TROUBLE SHOOTING GUIDE
Problem
The Led indicator
does not glow
No picture or sound
The settings you have made
in the menus have not been
changed.
The remote control is not
working.
Password forgotten.
Record does not start.
No PIP video.
Possible Reason
Mains cable is
not connected
No signal or weak signal.
The digital set-top box was
unplugged without first
going to standby.
The digital set-top box is in
Stand by.
Remote control is
incorrectly aimed.
Battery exhausted.
No or weak Aerial 2 input
Signal.
No or weak Aerial 2 input
Signal.
PIP Channel is radio or
teletext based.
31
What to do
Check if the main cable is not
plugged into the power socket.
Check the Aerial and scart
connections
Before unplugging your digital set-
top box, make sure it is in standby
Press the standby key.
Check if anything is obstructing the
front panel .
Change the batteries
Take contact with the nearest
service center.
Check Aerial 2 input connection.
Check Aerial 2 input connection.
Use PIP+ / PIP- to choose a valid
TV channel.